Skip to main content

Welding 2

Course number : 3250008   ID : 4706   
« back to classes page
Instruction is given in three common welding processes: GMAW (GAS METAL ARC WELDING) GTAW (GAS TUNGSTEN ARC WELDING and SMAW (SHIELDED METAL ARC WELDING) students will learn to use different electrodes in/on Aluminum and Carbon Steel. Using tubular and soild wire with short circuit and spray type wire transfers. Students learn hands-on application for forming Tee, Lap, Butt, and corner joints performing welds according to the AWS (American Welding Society) and ASME (American Society of Mechanical Engineers) Standards in Flat, Horizontal, Vertical, and Overhead positions. Supply List Provided.

Class Details

14 Sessions
Weekly - Mon, Wed

Building 1 - John Sessions Mechanical Building

MultipleInstructor :
1.Scott Isom2.Brad Huntsman 



Please read:  Supplies required. Equipment and tools needed: safety glasses, Coveralls or work shirt and pants (100% cotton NO polyester!) must have long sleeves, Gloves: all leather prefer with gauntlet, Boots: leather (over the ankles under pants), Head protection: (a) Welding Helmet [Shade 10 or Higher –Auto shade is ok] (b) Hair net (c) Pony tail, No Jewelry. Basic tools: Locking pliers/ Vice Grips, Measuring tape (under 20’) or combination square, a marking utensil: (a) soapstone (b) silver pencil (c) permanent marker (d) scribe with a magnet, and tip cleaners. Optional: Leather apron and sleeves or FR (Fire Resistant) jacket



Registration Closes On
Monday, March 29, 2021 @ 11:59 PM

Schedule Information

Date(s) Class Days Times Location Instructor(s) Instructional Method
3/29/2021 - 5/12/2021 Weekly - Mon, Wed 6:00 PM - 9:00 PM Idaho Falls, Building 1 - John Sessions Mechanical Building  Map, Room: 140 Brad Huntsman  ; Scott Isom  ClassRoom