Skip to main content

Gas Tungsten Arc Welding

Course number : 3250002   ID : 46   
« back to classes page
Instruction is given on GTAW (Gas Tungsten Arc Welding) on Aluminum, Stainless Steel, and Carbon Steel. Students learn hands-on application for forming Tee, Lap, Butt, and Corner welds according to AWS (American Welding Society) and ASME (American Society of Mechanical Engineers) Standards in the Flat to Overhead positions. Equipment and tools required: safety glasses, Coveralls or work shirt and pants (100% cotton NO polyester!) must have long sleeves, Gloves: all leather prefer with gauntlet, Boots: leather (over the ankles under pants), Head protection: (a) Welding cap (b) Hair net (c) Pony tail, No Jewelry. Basic tools: Locking pliers/ Vice Grips, Measuring tape (under 20’) or combination square, a marking utensil: (a) soapstone (b) silver pencil (c) permanent marker (d) scribe with a magnet, and tip cleaners.
GMAW (wire feed/MIG); Side cutting pliers or “Welpers” (welding pliers)
SMAW (stick/Arc); Chipping hammer and Wire brush
GTAW (TIG); Small wire brush
Optional: Leather apron and sleeves or FR (Fire Resistant) jacket

Class Details

14 Sessions
Weekly - Tue, Thu

Location
Building 1 - John Sessions Mechanical Building

Instructor
Brad Huntsman 

 

Notice

Please read:  Equipment and tools needed: safety glasses, Coveralls or work shirt and pants (100% cotton NO polyester!) must have long sleeves, Gloves: all leather prefer with gauntlet, Boots: leather (over the ankles under pants), Head protection: (a) Welding cap (b) Hair net (c) Pony tail, No Jewelry. Basic tools: Locking pliers/ Vice Grips, Measuring tape (under 20’) or combination square, a marking utensil: (a) soapstone (b) silver pencil (c) permanent marker (d) scribe with a magnet, and tip cleaners. GMAW (wire feed/MIG); Side cutting pliers or “Welpers” (welding pliers) SMAW (stick/Arc); Chipping hammer and Wire brush GTAW (TIG); Small wire brush Optional: Leather apron and sleeves or FR (Fire Resistant) jacket

Tuition: 

$265.00


Registration Closes On
Tuesday, September 11, 2018 @ 11:59 PM

Schedule Information

Date(s) Class Days Times Location Instructor(s) Instructional Method
9/11/2018 - 10/25/2018 Weekly - Tue, Thu 6:00 PM - 9:00 PM Idaho Falls, Building 1 - John Sessions Mechanical Building  Map, Room: 160 Brad Huntsman  ClassRoom

Other Class Offerings